Ikonka Art.KX10157 Foil roll gloss white 1.52x30m

FOIL ROLL GLOSS WHITE 1.52X30M

NOTE! By purchasing this product you will receive one roll of 1.52x30m.

Would you like to personalise the interior of your car? Or maybe not just the interior?
And not just your car?

Do you have a scratched windowsill or a dingy piece of furniture?

We have the solution to your problems.

Our thermoplastic veneer film SHINE WHITE is a decorative product. It will give your objects a fresh look - bring them to life! It will perfectly help you stand out from the crowd and break out of the accepted patterns. Our veneer film is the ideal material for inexpensively masking damage and other imperfections.

Glossy film is ideal for car tuning as well as giving your furniture and home interiors a unique style. The glossy finish will mask any imperfections, hiding scratches, dents and discolourations. The wrapped object will take on a classic look, giving the surroundings a harmonious atmosphere.

1. film properties:

• self-adhesive - the film has a special adhesive with channels, which makes it easy to stick and minimises the risk of air bubbles; the film is easy to install, especially on flat, even surfaces

• easy to touch up - you may be thinking, "what if I stick the film wrong?" Relax! You are even able to get the full strength of the film within a few minutes of first fixing. In the initial phase, the adhesive still "binds" weakly, making it easy for you to correct your mistake

• trouble-free removal - the film can be easily removed using warm air; no adhesive residue is left behind

• flexible and thermoplastic - the foil can be cut to the most diverse shapes. Simply apply heat, which increases its plasticity

• easy to cut - the film has evenly spaced lines on the inside for easy cutting to size

• resistant resistant to abrasion, detergents and even oil and grease

• easy to clean - simply wipe with a damp cloth

2. installation instructions:

Tools useful for film installation: surface degreaser, scissors, hair dryer and squeegee. (items not included)

NOTE! If you want to use a heat gun remember to keep the correct distance. The same applies to the hair dryer. Too high a temperature can make the veneer sticky.

1) Preparation of the fo il - the foil has evenly spaced lines on its inner side. Based on these, cut out the appropriate piece with scissors. ATTENTION: It is advisable to allow 2-3 cm for wrapping the film underneath the element to be wrapped.

2) Surface preparation - the area where the foil will be applied should be well degreased and wiped. It must be clean and dry.

3) Mounting the film - apply the film by gradually peeling off the protective paper. For flat surfaces, use a squeegee to apply pressure. However, if you come across curved or uneven shapes, heat up the film using a heat gun, for example. The film will become malleable and with a little patience and precision will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - the channel adhesive minimises the risk of air bubbles. However, if they do occur, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

3. use of the foil

The foil is primarily recommended for interior use. It can also be used outdoors.

The most common uses for the film are

• visual tuning of a car

• refreshing the look of a laptop, windowsill, phone, bike

• masking damage and other imperfections.

• do not stick to moving parts, e.g. door hinges, as the film may peel off

• do not stick to areas that heat up - e.g. exhaust pipes, lamps, oven doors - as the film may burn

4 Specification

Film type - SHINE

Colour: White

Thickness - 140 microns

Roll dimensions - 1.52x30m

Channel adhesive: yes

External: yes

Thermoplastic: yes

Waterproof: yes

Temperature of use - from -40°Cto +80°C

NOTE! When purchasing this product you will receive one roll of 1.52x30m.

Parameters: