Walltastic Mermaids Classic Wallpapers

Walltastic is a wallpaper backed, wipeable wall covering that covers any wall area up to 10ft x 8ft. Each product is in 12 pieces which means it is easily applicable and flexible according to how much space needs covering. It comes rolled up similar to wallpaper in a postal tube, including fitting instructions and is a great addition to any child’s bedroom, nursery, playroom or games room

Your wallpaper mural comes in 12 panels. We make every effort to deliver a topquality product in perfect condition, by applying strict quality controlprocedures. Before applying paste, lay out your Walltastic mural to ensure thatyou are happy with the print and colour match and that it fits together correctly.If any defects are found please contact your supplier immediately. We do notoffer exchanges or refunds once you have hung any part of your mural.Walltastic takes no responsibility for any damage caused to your mural after ithas been delivered or during hanging.INSTALLING THE PANELSFollow the manufacturer’s instructions on the order of panel installation. Do notwait too long between installation of each panel or the panel designs will notline up correctly. Be prepared to proceed with each panel until the job is donebefore taking a break.Since the placement of the first panel determines the overall look of the finishedmural, take extra time and care to place it accurately. To mark the position ofthe first panel, draw vertical lines on the wall using a pencil, a level and aplumbline.INSTRUCTIONS1. Select panel number 12. Lay panel face down on a flat surface. Apply the wallpaper paste evenly to theback of the panel allow the paste on all panels to soak for 1 - 2 minutes, do notlay the pasted sheets on top of each other and do not fold the pasted panel. It isvery important to take extra care to make sure paste is applied to the edges. Trynot to get paste on the printed side, hang the wallcovering without overlap.Apply the panel on to the wall using a soft cloth. Work from top to bottom andfrom centre to the edges.3. Carefully remove excess paste from the front of the mural using a soft cloth.Too much rubbing or cleaning will remove the ink from the paper.4. Repeat steps for panels 2 to 12, it is common for each panel of a wet muralto be 1.25cm larger than a dry mural as each panel expands once paste isapplied.5. Trim the excess edges carefully after the paper has dried.FAQ’sI have put up the top 6 panels. Why are the bottom 6 panels smaller?When you received your Walltastic mural all 12 panels were the same size, pastehas been applied to the top 6 panels which have now expanded and once pasteis applied to the bottom 6 panels these will expand too and match the toppanels which you have already installed.Why do I get air bubbles and creases in my wallpaper, even when I've smoothedit out?Bubbles can be caused by uneven smoothing, to avoid the risk of this type of airbubbles it's best to smooth the first stroke down the centre of the panel andsmooth outwards from here. If you are still hanging the wallpaper and can see abubble forming, simply lift the wallpaper just beyond the bubble & re-smoothover. If a bubble is identified after drying it is likely to be worsened by prickingor slicing with a needle or knife, as when attempting to smooth over, the slightlystretched section of wallpaper may not shrink back and as a result will causecreasing. Another cause of bubbles is if not enough paste has been used.Why do wallpapers sometimes shrink at the edges, leaving white lines?Shrinking occurs when the wallpaper does not adhere sufficiently to the wallbefore the wallpaper paste dries. Most wallpapers expand when paste is applied.If the wallpaper is not adhered to the wall properly or if it is over-stretched thewallpaper will start to shrink back as it dries.